D-Link DES-1228 Reference Manual page 281

DES-1228/ME:4#show address_binding ip_mac all
Command: show address_binding ip_mac all
IP Address MAC Address
--------------- -----------------
10.1.1.1 00-00-00-00-00-22
Total Entries: 1
DES-1228/ME:4#
delete address_binding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IP-MAC Binding on the Switch:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to delete IP-MAC Binding entries.
delete address_binding ip_mac [ipaddress <ipaddr> mac_address <macaddr> | all] |
blocked [all | vlan_name <vlan_name> mac_address <macaddr>]]
This command will delete IP-MAC Binding entries. Two different kinds of information can
be deleted.
IP_MAC – Individual Address Binding entries can be deleted by entering the physical and
IP addresses of the device. Toggling to all will delete all the Address Binding entries.
Blocked – Blocked address binding entries (bindings between VLAN names and MAC
addresses) can be deleted by entering the VLAN name and the physical address of the
device. To delete all the Blocked Address Binding entries, toggle all.
<ipaddr> – The IP address of the device where the IP-MAC binding is made.
<macaddr> – The MAC address of the device where the IP-MAC binding is made.
<vlan_name> – The VLAN name of the VLAN that is bound to a MAC address in order to
block a specific device on a known VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding entries; for Blocked Address
Binding entries all specifies all the blocked VLANs and their bound physical addresses.
Only Administrator-level users can issue this command.
Ports
--------------------
1-28
276