D-Link DES-1228 Reference Manual page 145

DES-1228/ME:4#show router_ports
Command: show router_ports
VLAN Name
Static router port
Dynamic router port
Total Entries: 1
DES-1228/ME:4#
show igmp_snooping forwarding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current IGMP snooping forwarding:
DES-1228/ME:4#show igmp_snooping forwarding vlan default
Command: show igmp_snooping forwarding vlan default
Total Entries in VLAN default: 0
DES-1228/ME:4#
show igmp_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current IGMP snooping group:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
: default
: 1-2,10
:
Used to display the current IGMP snooping forwarding state.
show igmp_snooping forwarding {vlan <vlan_name 32>}
Used to display the current IGMP snooping forwarding state.
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping group
information.
None.
Used to display the current IGMP snooping configuration on the Switch.
show igmp_snooping group {vlan <vlan_name 32>} {data_driven}
This command will display the current IGMP setup currently configured on the Switch.
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping group
information.
data_driven − hen the data driven learning is enabled, the multicast filtering mode for all
ports are ignored.
None.
140