D-Link DES-1228 Reference Manual page 267

Example usage
To display the LLDP per port TLV option configuration:
DES-1228/ME:4# show lldp ports 1
Command: show lldp ports 1
Port ID
----------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(NONE.)
Port VLAN ID
Enabled VLAN Name
(NONE.)
Enabled protocol_identity
(NONE.)
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DES-1228/ME:4#
show lldp local_ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
: 1
: TX_and_RX
: Disable
:
Used to display the per-port information currently available for populating outbound LLDP
advertisements.
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
This command displays the per-port information currently available for populating
outbound LLDP advertisements.
<portlist> − Specified a range of ports to be configured. When a port list is not specified,
information for all ports will be displayed.
brief − Display the information in brief mode.
normal − Display the information in normal mode. This is the default display mode.
detailed − Display the information in detailed mode.
None.
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
262