D-Link DES-1228 Reference Manual page 115

6 off
7 off
8 off
9 off
10 off
11 off
12 off
13 off
14 off
15 off
16 off
17 off
18 off
19 off
20 off
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config cos port_mapping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a specific CoS queue to be mapped to a destination port 1:
DES-1228/ME:4# config cos port_mapping class 3 port 1
Command: config cos port_mapping class 3 port 1
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
802.1p
Used to map a specific port to one of the hardware queues available on the switch.
config cos port_mapping class [ 0 | 3 ] port [<portlist> | all]
The config cos port_mapping command is used to configure port-to-class CoS mapping.
0-3 − The number of the switch's hardware priority queue. The switch has eight hardware
priority queues available. They are numbered between 0 (the lowest priority queue) and 3
(the highest priority queue).
<portlist> − Specifies a port or range of ports to be configured.
all − To set all ports in the system at once, you may use the "all" parameter.
Only Administrator-level users can issue this command.
110
off
off
off
off
off
off
off
off
off
off
off
off
off
off
off