D-Link DES-1228 Reference Manual page 9

.
?
cable_diag ports
clear
clear arptable
clear counters
clear fdb
clear flood_fdb
clear igmp_snooping data_driven_group
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
When users enter a command without its required parameters, the CLI will prompt users with Next possible completions:
message.
DES-1228/ME:4#config account
Command: config account
Next possible completions:
<username>
DES-1228/ME:4#
In this case, the command config account was entered with the parameter <username>. The CLI will then prompt users to enter
the <username> with the message, Next possible completions:. Every command in the CLI has this feature, and complex
commands have several layers of parameter prompting.
In addition, after typing any given command plus one space, users can see all of the next possible sub-commands, in sequential
order, by repeatedly pressing the Tab key.
To re-enter the previous command at the command prompt, press the up arrow cursor key. The previous command will appear at
the command prompt.
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Figure 2-2. The ? Command
Figure 2-3. Example Command Parameter Help
4