D-Link DES-1228 Reference Manual page 41

Managed 10/100mbps metro ethernet switch
Hide thumbs Also See for DES-1228:
Table of Contents

Advertisement

Example usage:
To create an SNMP view:
DES-1228/ME:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-1228/ME:4#
delete snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DES-1228/ME:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-1228/ME:4#
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to remove an SNMP view entry previously created on the Switch.
delete snmp view <view_name 32> [all | <oid>]
The delete snmp view command is used to remove an SNMP view previously created on
the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will be deleted from the
Switch.
Only Administrator-level users can issue this command.
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view previously created on the
Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
view that will be displayed.
None.
36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-1228me

Table of Contents