D-Link DES-1228 Reference Manual page 53

enable snmp authenticate traps
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-1228/ME:4#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DES-1228/ME:4#
config stp trap
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable a new root trap:
DES-1228/ME:4#config stp trap new_root enable
Command: config stp trap new_root enable
Success.
DES-1228/ME:4#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
This command is used to enable SNMP authentication trap support on the Switch.
None.
Only Administrator-level users can issue this command.
Used to configure STP traps for SNMP.
config stp trap {new_root [enable|disable] | topo_change [enable|disable]}(1)
Used to configure STP traps for SNMP.
new_root [enable|disable] – The user can enable or disable the new root option.
topo_change [enable|disable] – The user can enable or diable traps when a topology
change occur here.
Only Administrator-level users can issue this command.
Used to show SNMP trap support on the Switch .
show snmp traps {linkchange_traps { ports <portlist>}}
This command is used to view the SNMP trap support status currently configured on the
Switch.
None.
None.
48