D-Link DES-1228 Reference Manual page 91

show stp ports
Restrictions
Example usage:
To show STP ports information for port 1 (STP enabled on Switch):
DES-1228/ME:4#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1
Restricted role
External PathCost : Auto/200000
Port Forward BPDU : Enabled
MSTI Designated Bridge
----- ------------------
0 N/A
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
may use the Space bar, p and n keys to view information for the remaining ports.
None.
, Hello Time: 2 /2 , Port STP Enabled
: False, Restricted TCN : False
, Edge Port : False/No , P2P : Auto /Yes
Internal PathCost
-----------------
200000
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-8>
This command displays the Switch's current STP Instance Settings and the STP Instance
Operational Status.
<value 0-8> − Enter a value defining the previously configured instance_id on the Switch.
An entry of 0 will display the STP configuration for the CIST internally set on the Switch.
None
Prio Status
---- ----------
128 Disabled
86
, LBD : No
Role
----------
Disabled