D-Link DES-1228 Reference Manual page 265

Example usage
To configure the LLDP forward_lldpdu:
DES-1228/ME:4# config lldp forward_ message
Command: config lldp forward_ message
Success.
DES-1228/ME:4#
show lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the LLDP system level configuration status:
DES-1228/ME:4# show lldp
Command: show lldp
LLDP system information
Chassis Id Subtype
Chassis Id
System Name
System Description
System Capabilities
LLDP Configurations
LLDP Status
LLDP Forward Status
Message Tx Interval
Message Tx Hold Multiplier: 4
ReInit delay
Tx Delay
Notification Interval
DES-1228/ME:4#
show lldp mgt_addr
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
This command displays the switch's general LLDP configuration status.
show lldp
This command displays the switch's general LLDP configuration status.
None.
None.
: MACADDRESS
: 00-15-E9-41-5A-A7
: D-Link
: Metro Ethernet Switch
: Repeater, Bridge,
: Disable
: Disable
: 30
: 2
: 2
: 5
Used to display the lldp management address information.
show lldp mgt_addr {ipv4 <ipaddr>}
Displays the lldp management address information.
Ipv4 − IP address of IPV4.
None.
enable
enable
260