D-Link DES-1228 Reference Manual page 212

To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-1228/ME:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-1228/ME:4#
delete authen_login method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the method list name "Trinity":
DES-1228/ME:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DES-1228/ME:4#
show authen_login
Purpose
Syntax
Description
Parameters
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to delete a previously configured user defined method list of authentication methods
for users logging on to the Switch.
delete authen_login method_list_name <string 15>
This command is used to delete a list for authentication methods for user login.
<string 15> − Enter an alphanumeric string of up to 15 characters to define the given
method list to delete.
Only Administrator-level users can issue this command.
Used to display a previously configured user defined method list of authentication methods
for users logging on to the Switch.
show authen_login [default | method_list_name <string 15> | all]
This command is used to show a list of authentication methods for user login.
default – Entering this parameter will display the default method list for users logging on to
the Switch.
method_list_name <string 15> − Enter an alphanumeric string of up to 15 characters to
define the given method list to view.
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:

Method List Name – The name of a previously configured method list name.

Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).

Method Name – Defines which security protocols are implemented, per method
list name.

Comment – Defines the type of Method. User-defined Group refers to server
group defined by the user. Built-in Group refers to the TACACS, XTACACS,
TACACS+ and RADIUS security protocols which are permanently set in the
Switch. Keyword refers to authentication using a technique INSTEAD of TACACS
/ XTACACS / TACACS+ / RADIUS which are local (authentication through the
207