D-Link DES-1228 Reference Manual page 34

DES-1228/ME:4#config port_security ports 1-5 admin_state enable max_learning_addr 5
lock_address_mode DeleteOnReset
Command: config
lock_address_mode DeleteOnReset
Success.
DES-1228/ME:4#
delete port_security_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a port security entry:
DES-1228/ME:4#delete port_security_entry vlan_name default mac_address 00-01-30-10-2C-
C7 port 6
Command: delete port_security_entry vlan_name default mac_address 00-01-30-10-2C-C7
port 6
Success.
DES-1228/ME:4#
clear port_security_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear a port security entry by port:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
port_security ports
Used to delete a port security entry by MAC address, port number and VLAN ID.
delete port_security_entry vlan name <vlan_name 32> mac_address <macaddr>
port <auth_port>
This command is used to delete a single, previously learned port security entry by port,
VLAN name, and MAC address.
vlan name <vlan_name 32> − Enter the corresponding VLAN name of the port to delete.
mac_address <macaddr> − Enter the corresponding MAC address, previously learned by
the port, to delete.
port <auth_port> − Enter the port number which has learned the previously entered MAC
address.
Only Administrator-level users can issue this command.
Used to clear MAC address entries learned from a specified port for the port security
function.
clear port_security_entry ports <auth_portlist>
This command is used to clear MAC address entries which were learned by the Switch by
a specified port. This command only relates to the port security function.
<auth_portlist> − Specifies a port or port range to clear.
Only Administrator-level users can issue this command.
1-5 admin_state
29
enable max_learning_addr 5