D-Link DES-1228 Reference Manual page 196

config dst
Restrictions
Example usage:
To configure daylight savings time on the Switch:
DES-1228/ME:4#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2
e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day
wed e_mth 10 e_time 15:30 offset 30
Success.
DES-1228/ME:4#
show time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the time currently set on the Switch's System clock:
DES-1228/ME:4#show time
Command: show time
Current Time Source : System Clock
Current Time
Time Zone
Daylight Saving Time: Repeating
Offset in minutes
Repeating From
To
Annual From
To
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
e_time − Configure the time of day to end DST.
• <end_time hh:mm> − Time is expressed using a 24-hour clock, in hours and
minutes.
s_date − Configure the specific date (day of the month) to begin DST.
• <start_date 1-31> − The start date is expressed numerically.
e_date − Configure the specific date (day of the month) to begin DST.
• <end_date 1-31> − The end date is expressed numerically.
offset [30 | 60 | 90 | 120] − Indicates number of minutes to add or to subtract during the
summertime. The possible offset times are 30,60,90,120. The default value is 60
Only Administrator-level users can issue this command.
Used to display the current time settings and status.
show time
This will display system time and date configuration as well as display current system
time.
None.
None.
: 1 Days 01:39:17
: GMT +02:30
: 30
: Apr 2nd Tue 15:00
: Oct 2nd Wed 15:30
: 29 Apr 00:00
: 12 Oct 00:00
191