D-Link DES-1228 Reference Manual page 231

config ssh user
Parameters
Restrictions
Example usage:
To configure the SSH user:
DES-1228/ME:4# config ssh user Trinity authmode password
Command: config ssh user Trinity authmode password
Success.
DES-1228/ME:4#
show ssh user authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SSH user:
DES-1228/ME:4#show ssh user authmode
Command: show ssh user authmode
Current Accounts:
UserName
----------- ------------------
Trinity
DES-1228/ME:4#
Note: To configure the SSH user, the administrator must create a user account on the Switch. For
information concerning configuring a user account, please see the section of this manual entitled
Basic Switch Commands and then the command, create account.
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
<username 15> − Enter a username of no more than 15 characters to identify the SSH
user.
authmode – Specifies the authentication mode of the SSH user wishing to log on to the
Switch. The administrator may choose between:
hostbased – This parameter should be chosen if the user wishes to use a remote SSH
server for authentication purposes. Choosing this parameter requires the user to input
the following information to identify the SSH user.
hostname <domain_name 32> − Enter an alphanumeric string of up to 32
characters identifying the remote SSH user.
hostname_IP <domain_name 32> <ipaddr> − Enter the hostname and the
corresponding IP address of the SSH user.
password – This parameter should be chosen to use an administrator defined
password for authentication. Upon entry of this command, the Switch will prompt the
user for a password, and then to retype the password for confirmation.
publickey – This parameter should be chosen to use the publickey on a SSH server for
authentication.
Only Administrator-level users can issue this command.
Used to display the SSH user setting.
show ssh user authmode
This command allows users to display the current SSH user setting.
None.
None.
Authentication
Password
Host
----------------
226
Name
--------
Host IP