D-Link DES-1228 Reference Manual page 185

DES-1228/ME:4#config cpu access_profile profile_id 3 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all deny
Command: config cpu
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port all deny
Success.
DES-1228/ME:4#
delete cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-1228/ME:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-1228/ME:4#
show cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CPU filtering state on the Switch:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
access_profile
Used to delete a previously created CPU access profile.
delete cpu access_profile profile_id <value 1-3>
The delete cpu access_profile command is used to delete a previously created CPU
access profile.
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify the CPU
access profile to be deleted with this command. This value is assigned to the access
profile when it is created with the create cpu access_profile command.
Only Administrator-level users can issue this command.
Used to view the CPU access profile entry currently set in the Switch.
show cpu access_profile profile_id <value 1-3>
The show cpu access_profile command is used view the current CPU interface filtering
entries set on the Switch.
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify the CPU
access profile to be deleted with this command. This value is assigned to the access
profile when it is created with the create cpu access_profile command.
None.
profile_id 3 add
180
access_id 1 ip vlan default