DES-1228/ME:4#show smtp
Command: show smtp
smtp status: Enabled
smtp server address : 166.99.66.33
smtp server port : 25
self mail address: smtp@1228.dev
Index
--------
1
2
3
4
5
6
7
8
DES-1228/ME:4#
smtp send_testmsg
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To send a test mail message to all configured mail recipients.
DES-1228/ME:4# smtp send_testmsg
Command: smtp send_testmsg
Subject: This is a SMTP test.
Content: Hello everybody!!
Sending mail, please wait...
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Mail Receiver Address
---------------------------------
darren_tremblett@nhl.com
dave@yeehaw.com
administrator@dlink.com
fattony@themob.com
Used to send a test message to mail recipients configured on the Switch.
smtp send_testmsg
This command is used to send test messages to all mail recipients configured on the
Switch, thus testing the configurations set and the reliability of the SMTP server.
None.
Only Administrator-level users can issue this command.
232