D-Link DES-1228 Reference Manual page 165

config radius add
Restrictions
Example usage:
To configure the RADIUS server communication settings:
DES-1228/ME:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DES-1228/ME:4#
config radius delete
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete previously configured RADIUS server communication settings:
DES-1228/ME:4#config radius delete 1
Command: config radius delete 1
Success.
DES-1228/ME:4#
config radius
Purpose
Syntax
Description
Parameters
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
auth_port <udp_port_number 1-65535> − The UDP port number for authentication
requests. The default is 1812.
acct_port <udp_port_number 1-65535> − The UDP port number for accounting requests.
The default is 1813.
Only Administrator-level users can issue this command.
Used to delete a previously entered RADIUS server configuration.
config radius delete <server_index 1-3>
The config radius delete command is used to delete a previously entered RADIUS server
configuration.
<server_index 1-3> − Assigns a number to the current set of RADIUS server settings. Up
to 3 groups of RADIUS server settings can be entered on the Switch.
Only Administrator-level users can issue this command.
Used to configure the Switch's RADIUS settings.
config radius <server_index 1-3> {ipaddress <server_ip> | key <passwd 32> |
auth_port <udp_port_number 1-65535> | acct_port <udp_port_number 1-65535>}(1)
The config radius command is used to configure the Switch's RADIUS settings.
<server_index 1-3> − Assigns a number to the current set of RADIUS server settings. Up
to 3 groups of RADIUS server settings can be entered on the Switch.
ipaddress <server_ip> − The IP address of the RADIUS server.
key − Specifies that a password and encryption key will be used between the Switch and
the RADIUS server.
• <passwd 32> − The shared-secret key used by the RADIUS server and the
Switch. Up to 32 characters can be used.
auth_port <udp_port_number 1-65535> − The UDP port number for authentication
160