D-Link DES-1228 Reference Manual page 20

enable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-1228/ME:4#enable clipaging
Command: enable clipaging
Success.
DES-1228/ME:4#
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-1228/ME:4#disable clipaging
Command: disable clipaging
Success.
DES-1228/ME:4#
enable telnet
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to pause the scrolling of the console screen when a command displays more than
one page.
enable clipaging
This command is used when issuing a command which causes the console screen to
rapidly scroll through several pages. This command will cause the console to pause at the
end of each page. The default setting is enabled.
None.
Only Administrator-level users can issue this command.
Used to disable the pausing of the console screen scrolling at the end of each page when
a command displays more than one screen of information.
disable clipaging
This command is used to disable the pausing of the console screen at the end of each
page when a command would display more than one screen of information.
None.
Only Administrator-level users can issue this command.
Used to enable communication with and management of the Switch using the Telnet
protocol.
enable telnet <tcp_port_number 1-65535>
This command is used to enable the Telnet protocol on the Switch. The user can specify
the TCP or UDP port number the Switch will use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports are numbered between 1
and 65535. The "well-known" TCP port for the Telnet protocol is 23.
Only Administrator-level users can issue this command.
15