D-Link DES-1228 Reference Manual page 125

delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN "v1":
DES-1228/ME:4#delete vlan v1
Command: delete vlan v1
Success.
DES-1228/ME:4#
config vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
DES-1228/ME:4#config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
DES-1228/ME:4#
To delete ports from a VLAN:
DES-1228/ME:4#config vlan v1 delete 6-8
Command: config vlan v1 delete 6-8
Success.
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only Administrator-level users can issue this command.
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[ add [ tagged | untagged | forbidden ] |delete ]
<portlist> | advertisement [ enable | disable ]}(1)
This command allows the user to add ports to the port list of a previously configured VLAN.
The user can specify the additional ports as tagging, untagging, or forbidden. The default
is to assign the ports as untagging.
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There are three types of
ports to add:
tagged − Specifies the additional ports as tagged.
•
untagged − Specifies the additional ports as untagged.
•
forbidden − Specifies the additional ports as forbidden
•
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the specified VLAN.
Only Administrator-level users can issue this command.
120