D-Link DES-1228 Reference Manual page 44

Example usage:
To display the currently entered SNMP community strings:
DES-1228/ME:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
------------------
private
public
dlink
Total Entries: 3
DES-1228/ME:4#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DES-1228/ME:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-1228/ME:4#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
View Name
-------------------
CommunityView
CommunityView
ReadView
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the SNMP engine on the
Switch.
<snmp_engineID> − An alphanumeric string that will be used to identify the SNMP engine
on the Switch.
Only Administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
The show snmp engineID command displays the identification of the SNMP engine on
the Switch.
None.
None.
Access Right
------------
read_write
read_only
read_write
39