D-Link DES-1228 Reference Manual page 269

DES-1228/ME:4#show lldp local_ports 1 mode normal
Command: show lldp local_ports 1 mode normal
Port ID : 1
-------------------------------------------------------------------------
Port Id Subtype
Port Id
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
DES-1228/ME:4#
To display outbound LLDP advertisements for specific ports in brief mode:
DES-1228/ME:4#show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
-------------------------------------------------------------------------
Port Id Subtype
Port Id
Port Description
DES-1228/ME:4#
show lldp remote_ports
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the information learned from the neighbor.
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
This command displays information learnt from the neighbor parameters.
Due to the memory limitations, the switch can only receive 32 VLAN Name entries and 10
Management Address entries.
<portlist> − Specified a range of ports to be configured. When a port list is not specified,
information for all ports will be displayed.
brief − Display the information in brief mode.
normal − Display the information in normal mode. This is the default display mode.
detailed − Display the information in detailed mode.
None.
: Local
: 1/1
: D-Link DES-1228/ME R1.00 Port 1
: 1
: 1
: 0
: 1
: 0
: (See detail)
: (See detail)
: (See detail)
: 1536
: Local
: 1/1
: D-Link DES-1228/ME R1.00 Port 1
264