Configuring Snmp V3 Users; Table 5-54: Snmp Community Strings Parameters - AudioCodes Mediant 1000 User Manual
Sip media gateways
Hide thumbs
Also See for Mediant 1000:
- User manual (1195 pages) ,
- Hardware installation manual (84 pages) ,
- Installation manual (76 pages)
Table of Contents
Advertisement
SIP User's Manual
Parameter
Read Only Community String
[SNMPReadOnlyCommunityString_x]
Read / Write Community String
[SNMPReadWriteCommunityString_x]
Trap Community String
[SNMPTrapCommunityString]
5.10.3 Configuring SNMP V3 Users
The 'SNMP V3 Setting' screen is used to configure authentication and privacy for up to 10
SNMP v3 users.
To configure the SNMP v3 users, take the following 6 steps:
1.
Access the 'Management Settings' screen (Advanced Configuration menu >
Management Settings); the 'Management Settings' screen is displayed.
2.
Open the 'SNMP V3 Setting' screen by clicking the SNMP V3 Table arrow sign (-->).
3.
To add an SNMP v3 user, in the 'New Row Index' field, type the desired row index,
and then click Add an Empty Row. A new row appears.
4.
Configure the SNMP V3 Setting parameters according to the table below.
5.
Click the Apply Row Settings button to save your changes.
6.
To save the changes so they are available after a hardware reset or power fail, refer to
'Saving Configuration' on page 278.
Notes:
Version 5.2
Table 5-54: SNMP Community Strings Parameters
Up to five read-only community strings (up to 19 characters
each).
The default string is 'public'.
Up to five read / write community strings (up to 19
characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
Figure 5-59: SNMP V3 Setting Screen
•
To delete an SNMP V3 user, select the 'Index' radio button
corresponding to the SNMP V3 user that you want to delete, and then
click the Delete Row button.
•
To copy an existing SNMP V3 user configuration to a new row, select the
radio button on the left of the desired SNMP V3 user, and then click
Copy Selected Row as A New Row. A new row appears that includes
the same configuration as the selected row.
•
To sort all row indexes incrementally, click Compact Table.
Description
249
5. Web-based Management
September 2007
Advertisement
Table of Contents
