Table 5-3: Customizable Logo Ini File Parameters; Table 5-4: Web Appearance Customizable Ini File Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
Note:
Tip:
To replace the default logo with your own corporate image via the
ini file, take these 3 steps:
1. Place your corporate logo image file in the same folder as where the device's ini file is
located (i.e., the same location defined in the BootP/TFTP configuration utility). For
detailed information on the BootP/TFTP, refer to the SIP Series Reference Manual).
2. Add or modify the ini file parameters described in the table below (as described in'
Modifying an ini File' on page 293).
3. Load the ini file using only BootP / TFTP (i.e., not through the Embedded Web
Server).
Parameter
LogoFileName
LogoWidth
5.4.5.1.2 Replacing the Main Corporate Logo with a Text String
The main corporate logo can be replaced with a text string. To replace AudioCodes' default
logo with a text string using the ini file, add or modify the two ini file parameters listed in the
table below (according to the procedure described in n 'Modifying an ini File' on page 293).

Table 5-4: Web Appearance Customizable ini File Parameters

Parameter
UseWebLogo
WebLogoText
Version 5.2
Use a gif, jpg or jpeg file for the logo image. It is important that the image file
has a fixed height of 59 pixels (the width can be configured up to a maximum
of 339 pixels). The size of the image files (logo and background) is limited
each to 64 Kbytes.
If you encounter any problem during the loading of the files or you want to
restore the default images, click the Restore Default Images button.

Table 5-3: Customizable Logo ini File Parameters

The name of the image file containing your corporate logo. Use a gif, jpg or
jpeg image file.
The default is AudioCodes' logo file.
Note: The length of the name of the image file is limited to 47 characters.
Width (in pixels) of the logo image.
The default value is 339 (which is the width of AudioCodes' displayed
logo).
Note: The optimal setting depends on the resolution settings.
[0] = Logo image is used (default).
[1] = Text string is used instead of a logo image.
Text string that replaces the logo image.
The string can be up to 15 characters.
Description
Description
67
5. Web-based Management
September 2007