AudioCodes Mediant 1000 User Manual page 273

SIP User's Manual
5.12.4.2.1 Using the Embedded Web Server
The procedure below describes how to load a Software Upgrade Key to the gateway using
the Embedded Web Server.
To load a Software Upgrade Key using the Embedded Web Server,
take these 5 steps:
1. Access the devices Embedded Web Server (refer to 'Accessing the Embedded Web
Server' on page 60).
2. Click the Software Update button.
3. Click the Software Upgrade Key tab; the 'Software Upgrade Key' screen is displayed
(shown in the figure below).
•
When loading a single key S/N line to a device:
a.
b.
c.
Version 5.2
Open the Software Upgrade Key file (using, for example, Microsoft®
Notepad).
Select and copy the key string of the device's S/N and paste it into the field
'New Key'. If the string is sent in the body of an email, copy and paste it from
there.
Click the Add Key button.
273
5. Web-based Management
September 2007