Internal Srv Table; Figure 5-23: Internal Dns Table Screen - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To configure the internal DNS table, take these 7 steps:
1. Open the 'Internal DNS Table' screen (Protocol Management menu > Routing
Tables submenu > Internal DNS Table option).
2. In the 'Domain Name' field, enter the host name to be translated. You can enter a
string up to 31 characters long.
3. In the 'First IP Address' field, enter the first IP address (in dotted format notation) that
the hostname is translated to.
4. In the 'Second IP Address' field, enter the second IP address that the hostname is
translated to.
5. Repeat steps 2 to 4, for each Internal DNS Table entry.
6. Click the Submit button to save your changes.
7. To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
5.5.4.5

Internal SRV Table

The Internal SRV Table option (i.e., 'Internal SRV Table' screen) is used for resolving host
names to DNS A-Records. Three different A-Records can be assigned to a hostname.
Each A-Record contains the host name, priority, weight, and port.
You can also configure the Internal SRV table using the ini file parameter SRV2IP (refer to
'Networking Parameters' on page 299).
Note:
Version 5.2
Figure 5-24: Internal DNS Table Screen
If the Internal SRV table is configured, the gateway first tries to resolve a
domain name using this table. If the domain name isn't found, the gateway
performs an SRV resolution using an external DNS server.
141
5. Web-based Management
September 2007