AudioCodes Mediant 1000 User Manual page 333

SIP User's Manual
ini File Field Name
Web Parameter Name
Authentication
SITDetectorEnable
EnableSAS
SASLocalSIPUDPPort
SASDefaultGatewayIP
SASRegistrationTime
Version 5.2
Table 6-7: SIP Configuration Parameters
Valid Range and Description
Defines a username and password combination for authenticating each
gateway port.
Format of this ini file parameter table:
[Authentication]
FORMAT Authentication_Index = Authentication_UserId,
Authentication_UserPassword, Authentication_Port,
Authentication_Module;
[\Authentication]
Where,
UserId = User name
UserPassword = Password
Port = Port number
Module = Module number (0 - 5)
For example:
[Authentication]
Authentication 1 = david,14325,1,0;
Authentication 2 = Alex,18552,1,0;
Authentication 3 = user1, 1234,1,0;
[\Authentication]
Notes:
For an explanation on ini file parameter tables, refer to Structure of
ini File Parameter Tables on page 295.
You can omit either the username or password using the sign '$$'. If
omitted, the port's phone number is used for authentication.
The indexing of this ini file parameter table starts at 1.
To configure the authentication username and password using the
Embedded Web Server, refer to Authentication on page 154.
Enables or disables Special Information Tone (SIT) detection according
to the ITU-T recommendation E.180/Q.35.
[0] = Disable (default).
[1] = Enable.
For a description of this parameter, refer to Stand-Alone Survivability on
page 123.
For a description of this parameter, refer to Stand-Alone Survivability on
page 123.
For a description of this parameter, refer to Stand-Alone Survivability on
page 123.
Determines the Expires header value that is returned in a 200 OK
response to an incoming REGISTER message when in SAS
'Emergency Mode'.
The valid range is or 10 (Digital) to 2,000,000. The default value is 20.
333
6. ini File Configuration
September 2007