SIP User's Manual
5.5.8.5
Caller ID Permissions
The 'Caller ID Permissions' screen is used to enable or disable (per port) the Caller ID
generation (for FXS modules) and detection (for FXO modules). If a port isn't configured, its
Caller ID generation / detection are determined according to the global parameter
EnableCallerID (described in 'Supplementary Services' on page 113).
You can also configure the Caller ID Permissions table using the ini file parameter
EnableCallerID (refer to 'Analog Telephony Parameters' on page 350).
To configure the Caller ID Permissions Table, take these 5 steps:
1.
Open the 'Caller ID Permissions' screen (Protocol Management menu > Endpoint
Settings > Caller ID Permissions option).
2.
In the 'Caller ID' field, select one of the following:
•
Enable: Enables Caller ID generation (FXS) or detection (FXO) for the specific
port.
•
Disable: Caller ID generation (FXS) or detection (FXO) for the specific port is
disabled.
•
Empty: Caller ID generation (FXS) or detection (FXO) for the specific port is
determined according to the parameter EnableCallerID (described in
'Supplementary Services' on page 113).
3.
Repeat Step 2 for each port.
4.
Click the Submit button to save your changes.
5.
To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
Version 5.2
159
5. Web-based Management
September 2007