Configuration Files Parameters; Table 6-15: Configuration Files Parameters - AudioCodes Mediant 1000 User Manual

6.5.15 Configuration Files Parameters

The configuration files (i.e., auxiliary files) can be loaded to the gateway using the
Embedded Web Server or a TFTP session (refer to 'Auxiliary Files' on page 269). Before
you load them to the gateway, in the ini file you need to specify the files that you want
loaded and whether they must be stored in the non-volatile memory. The table below lists
the ini file parameters associated with these configuration files:
ini File Field Name
CallProgressTonesFilename
FXSLoopCharacteristicsFileName The name (and path) of the file providing the FXS line
FXOLoopCharacteristicsFileName The name (and path) of the file providing the FXO line
CASFileName
CASFileName_x
CASTablesNum
VoicePromptsFileName
PrerecordedTonesFileName
CasTrunkDialPlanName
DialPlanFileName
UserInfoFileName
SaveConfiguration
SIP User's Manual

Table 6-15: Configuration Files Parameters

The name of the file containing the Call Progress Tones
definitions. Refer to the SIP Series Reference Manual for
additional information on how to create and load this file.
characteristic parameters.
characteristic parameters.
This is the name of the file containing specific CAS protocol
definition (such as 'E_M_WinkTable.dat'). These files are
provided to support various types of CAS signaling.
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with
one or more of the gateway trunks using the parameter
CASTableIndex_x.
Number, 1 to 8. Specifies how many CAS configuration files are
loaded.
The name (and path) of the file containing the Voice Prompts
definitions. Refer to the SIP Series Reference Manual for
additional information on how to create and load this file.
The name (and path) of the file containing the Prerecorded
Tones.
The Dial Plan name (up to 11-character strings) that is used on
the specific trunk.
The name (and path) of the file containing dial-plan
configuration for CAS and SIP protocols. This file should be
constructed using the TrunkPack Conversion Utility (refer to the
SIP Series Reference Manual) supplied as part of the software
package on the CD accompanying the gateway.
The name (and path) of the file containing the User Information
data.
Determines if the gateway's configuration (parameters and files)
is saved to flash (non-volatile memory).
[0] = Configuration isn't saved to flash memory.
[1] = Configuration is saved to flash memory (default).
378
Valid Range and Description
Document #: LTRT-83302
Mediant 1000