AudioCodes Mediant 1000 User Manual page 316

ini File Field Name
Web Parameter Name
WelcomeMessage
DisableWebConfig
HTTPport
Telnet Parameters
TelnetServerEnable
TelnetServerPort
TelnetServerIdleDisconne
ct
SSHServerEnable
SSHServerPort
SIP User's Manual
Table 6-3: Web and Telnet Parameters
Valid Range and Description
Configures the Welcome message that appears after a Embedded Web
Server login.
The format of this ini file parameter table is:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "..." ;
WelcomeMessage 2 = "..." ;
WelcomeMessage 3 = "..." ;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome message ***" ;
WelcomeMessage 3 = "**********************************" ;
[\WelcomeMessage]
Notes:
Each index represents a line of text in the Welcome message box. Up
to 20 indexes can be defined.
If this parameter is not configured, no Welcome message box is
displayed.
[0] = Enable changing parameters from Embedded Web Server
(default).
[1] = Operate Embedded Web Server in 'read only' mode.
HTTP port used for Web management (default is 80).
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 182.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 182.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 182.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 182.
For a description of this parameter, refer to 'Configuring the Application
Settings' on page 182.
316
Mediant 1000
Document #: LTRT-83302