Network Settings; Configuring The Ip Settings - AudioCodes Mediant 1000 User Manual

5.6

Network Settings

The Network Settings menu allows you to configure the following:
IP Settings (refer to 'Configuring the IP Settings' on page 178)
Application Settings (refer to 'Configuring the Application Settings' on page 182)
NFS Settings (refer to 'Configuring the NFS Settings' on page 184)
IP Routing Table (refer to 'Configuring the IP Routing Table' on page 186)
VLAN Settings (refer to 'Configuring the VLAN Settings' on page 188)
5.6.1

Configuring the IP Settings

The 'IP Settings' screen is used for configuring various IP networking parameters.
To configure the IP Settings parameters, take these 4 steps:
1. Open the 'IP Settings' screen (Advanced Configuration menu > Network Settings >
IP Settings option).
SIP User's Manual
Figure 5-37: IP Settings Screen
178
Mediant 1000
Document #: LTRT-83302