Configuring The Voice Settings; Table 5-37: Media Settings, Voice Settings Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
5.7.1

Configuring the Voice Settings

The 'Voice Settings' screen is used for configuring various voice parameters such as voice
volume.
To configure the Voice Settings parameters, take these 4 steps:
1. Open the 'Voice Settings' screen (Advanced Configuration menu > Media Settings
> Voice Settings option).
2. Configure the Voice Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
Parameter
Voice Volume
[VoiceVolume]
Input Gain
[InputGain]
Version 5.2

Table 5-37: Media Settings, Voice Settings Parameters

Voice gain control in dB. This parameter sets the level for the
transmitted (IP PSTN/Tel) signal.
The valid range is -32 to 31 dB. The default value is 0 dB.
PCM input gain control in dB. This parameter sets the level for the
received (Tel/PSTN IP) signal.
The valid range is -32 to 31 dB. The default value is 0 dB.
Description
191
5. Web-based Management
September 2007