Restoring Default Settings; Using The Home Page; Accessing The Home Page - AudioCodes Mediant 1000 User Manual

5.13.6.2 Restoring Default Settings

You can use the gateway's hardware Reset button to restore all the gateway's
configuration settings to default (e.g., IP address and login username and password).
These default settings include factory as well as user-defined (refer to 'Defining Default
Values' on page 281) defaults, where user-defined defaults override corresponding factory
defaults.
To restore the gateway to default settings, take this step:
With a paper clip or any other similar pointed object, press and hold down the Reset
button (located on the front panel) for about six seconds; the gateway is restored to its
factory settings.
5.14

Using the Home Page

The Home icon, located above the main menu bar, opens the Home page. This page
provides you with a graphical display of the gateway's front-panel and allows you to
monitor various ports and interfaces, view alarms, assign names to ports, release analog
channels, and replace modules.

5.14.1 Accessing the Home Page

To access the Home page, take this step:
Open the Home page by clicking the Home icon
SIP User's Manual
Figure 5-75: Graphical Display of the Hardware
282
Mediant 1000
; the Home page is displayed.
Document #: LTRT-83302