Selected Technical Specifications; Table 12-1: Mediant 1000 Functional Specifications - AudioCodes Mediant 1000 User Manual

SIP User's Manual
12

Selected Technical Specifications

The table below lists the main technical specifications of the Mediant 1000.
Function
Modularity and Capacity
Interface I/O Modules
FXS Telephony
Interface
FXO Telephony
Interface
Digital Modules
FXS Functionality
FXS Capabilities
Version 5.2

Table 12-1: Mediant 1000 Functional Specifications

6 slots for analog modules, supporting up to 24 FXS/FXO analog
ports.
Up to 4 digital trunks (fully flexible, up to 4 trunks per module).
Note: Channel capacity depends on configuration settings.
Up to 6 modules with 4 FXS RJ-11 ports per module (for a total of up to
24 analog FXS RJ-11 ports).
Up to 6 modules with 4 FXO RJ-11 ports per module (for a total of up to
24 analog FXO RJ-11 ports).
1, 2, 3 or 4 E1/T1/J1 spans (Balanced 120/100 Ohm) using RJ-48
connectors per module.
Up to 4 digital modules (maximum 4 spans per gateway).
Optional 1+1 or 2+2 fallback.
Short or long haul, up to 3,000 m (10,000 ft.), using 24 AWG line cord.
Number of ports per FXS module: 2 or 4
Caller ID generation: Bellcore GR-30-CORE Type 1 using Bell 202 FSK
modulation, ETSI Type 1, NTT, Denmark, India, Brazil, British and DTMF
ETSI CID (ETS 300-659-1).
Polarity Reversal and Wink signals generation
Message waiting indication (lamp)
Programmable Line Characteristics: Battery feed, line current, hook
thresholds, AC impedance matching, hybrid balance, Tx & Rx frequency
response, Tx & Rx Gains
Note: For a specific coefficient file, please contact AudioCodes.
Configurable ringing signal: up to three cadences and frequency 10 to 200
Hz.
Drive 4 phones per port simultaneously in offhook and Ring states.
REN = 5.
Over-temperature protection for abnormal situations such as shorted
lines.
Lifeline on every FXS factory-preconfigured module.
12. Selected Technical Specifications
Specification
481 September 2007