AudioCodes Mediant 1000 User Manual page 235

SIP User's Manual
Parameter
RADIUS VSA Vendor ID
[RadiusVSAVendorID]
RADIUS VSA Access Level
Attribute
[RadiusVSAAccessAttribute
]
EtherDiscover Settings
EtherDiscover Operation
Mode
SRTP Settings
Enable Media Security
[EnableMediaSecurity]
Media Security Behavior
[MediaSecurityBehaviour]
IPSec Settings
Enable IP Security
[EnableIPSec]
Version 5.2
Table 5-47: General Security Settings Parameters
Defines the vendor ID the gateway accepts when parsing a RADIUS
response packet.
The valid range is 0 to 0xFFFFFFFF. The default value is 5003.
Defines the code that indicates the access level attribute in the
Vendor Specific Attributes (VSA) section of the received RADIUS
packet.
The valid range is 0 to 255. The default value is 35.
N/A.
Enables or disables the Secure Real-Time Transport Protocol
(SRTP).
[0] Disable = SRTP is disabled (default).
[1] Enable = SRTP is enabled.
Determines the gateway's mode of operation when SRTP is used
(EnableMediaSecurity = 1).
[0] Preferable = The gateway initiates encrypted calls. If
negotiation of the cipher suite fails, an unencrypted call is
established. Incoming calls that don't include encryption
information are accepted.
[1] Mandatory = The gateway initiates encrypted calls. If
negotiation of the cipher suite fails, the call is terminated. Incoming
calls that don't include encryption information are rejected
(default).
Enables / disables the Secure Internet Protocol (IPSec) on the
gateway.
[0] Disable = IPSec is disabled (default).
[1] Enable = IPSec is enabled.
Description
235
5. Web-based Management
September 2007