Table 2-1: Mediant 1000 Front View Component Descriptions
Item #
Label
1
FXO
2
FXS
3
TRUNKS
4
MPM
5
CPU
6
CPU
7
Power 1
8
Power 2
9
Schematic Extractable fan tray.
10
-
11
I
12
II
13
♫
14
I
15
II
16
I0I0
17
//
The figure below illustrates the front layout of the Mediant 1000. There is also a schematic
of the front layout on the front panel of the fan tray. To view your specific device's
configuration using the Embedded Web Server, refer to 'Monitoring the Gateway (Home
Page)' on page 282.
Note:
SIP User's Manual
Front View of Chassis
4-port FXO (or FXO G) module.
2-port FXS module.
2 RJ-48c ports digital module (E1/T1/J1).
Media Process module.
Spare CPU module slot or for OSN server where slot hosts Connection
module (for OSN Server installation, refer to 'OSN Server Hardware
Installation' on page 487).
Main CPU module.
Spare power supply slot.
Main power supply.
Enlarged View of CPU
Locking screws (2).
Dry contact port (normally open).
Dry contact port (normally closed).
Audio IN/OUT (for paging and MOH (Music on Hold) functionalities).
10/100 Base-TX Ethernet Port 1.
10/100 Base-TX Ethernet Port 2.
RS-232 port.
Reset button.
Figure 2-2: Mediant 1000 Front Layout
The I/O modules must be housed in consecutive slots. In other words, if the
Mediant 1000 houses three I/O modules, they must occupy slots 1, 2, and 3.
Component Description
22
Mediant 1000
Document #: LTRT-83302