2.
Insert the replaced module by performing the following:
a.
Physically insert the replaced module (refer to 'Replacing Modules' on page 43).
b.
On the Home page, click the top border line pertaining to the module that you
want to replace; the Insert Module button appears.
Figure 5-87: Insert Module Button after Clicking Module's Name
c.
Click the Insert Module button; a message appears informing you that this may
take a few seconds.When the message disappears, the module is inserted
indicated by the disappearance of the 'Reserved' word from the module's name.
5.15
Logging Off the Embedded Web Server
The Log Off button enables you to log off the Embedded Web Server and to re-access it
with a different account. For detailed information on the Web User Accounts, refer to 'User
Accounts' on page 58.
To log off the Embedded Web Server, take these 2 steps:
1.
Click the Log Off button on the main menu bar; the 'Log Off' prompt screen is
displayed.
2.
Click OK; the Web session is logged off.
SIP User's Manual
Figure 5-88: Log Off Confirmation Box
292
Mediant 1000
Document #: LTRT-83302