Configuring The General Security Settings - AudioCodes Mediant 1000 User Manual

5.9.5

Configuring the General Security Settings

The 'General Security Settings' screen is used to configure various security features.
To configure the general security parameters, take these 4 steps:
1. Open the 'General Security Settings' screen (Advanced Configuration menu >
Security Settings > General Security Settings option).
2. Configure the General Security Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
SIP User's Manual
Figure 5-53: General Security Settings Screen
232
Mediant 1000
Document #: LTRT-83302