AudioCodes Mediant 1000 User Manual page 366

Table 6-13: Number Manipulation and Routing Parameters
ini File Field Name
Web Parameter Name
SourceNumberMapIP2Tel Manipulates the source number for IP-to-Tel calls (also configured in
SIP User's Manual
Valid Range and Description
DestinationPrefix = Destination number prefix
SourcePrefix = Source number prefix
SourceAddress = Source IP address (obtained from the Request-
URI in the INVITE message)
NumberType = Number Type used in RPID header
NumberPlan = Number Plan used in RPID header
RemoveFromLeft = Number of stripped digits from the left
RemoveFromRight = Number of stripped digits from the right
LeaveFromRight = Number of remaining digits from the right
Prefix2Add = String to add as prefix
Suffix2Add = String to add as suffix
IsPresentationRestricted = Calling number presentation (0 to allow
presentation; 1 to restrict presentation)
For example:
[SourceNumberMapTel2Ip]
SourceNumberMapTel2Ip 0 = 22,03,$$,0,0,$$,2,$$,667,$$,0;
SourceNumberMapTel2Ip 0 = 10,10,*,255,255,3,0,5,100,$$,255;
[\SourceNumberMapTel2Ip]
Notes:
For a description on ini file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 295.
RemoveFromLeft, RemoveFromRight, Prefix2Add, Suffix2Add,
LeaveFromRight, NumberType, NumberPlan, and
IsPresentationRestricted are applied if the called and calling
numbers match the DestinationPrefix and SourcePrefix conditions.
The manipulation rules are executed in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight, Prefix2Add,
and Suffix2Add.
Parameters can be skipped by using two dollar signs ('$$').
An asterisk ('*') represents all IP addresses.
IsPresentationRestricted is set to 'Restricted' only if 'Asserted
Identity Mode' is set to 'P-Asserted'.
Number Plan and Type can optionally be used in Remote Party ID
(RPID) header by using the EnableRPIHeader and AddTON2RPI
parameters.
the Embedded Web Server's 'Source Phone Number Manipulation
Table for IP Tel Calls' screen -- refer to 'Configuring the Number
Manipulation Tables' on page 125).
Format of this ini file parameter table:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
366
Mediant 1000
Document #: LTRT-83302