AudioCodes Mediant 1000 User Manual page 86

Parameter
First Redundant Proxy
IP Address
[ProxyIP]
Second Redundant
Proxy IP Address
[ProxyIP]
Third Redundant Proxy
IP Address
[ProxyIP]
Redundancy Mode
[ProxyRedundancyMo
de]
SIP User's Manual
Table 5-9: Proxy & Registration Parameters
IP addresses of the first redundant Proxy you are using.
Enter the IP address as FQDN or in dotted decimal notation (e.g.,
192.10.1.255). You can also specify the selected port in the format <IP
Address>:<port>.
Notes:
This parameter is available only if you select 'Use Proxy' in the 'Enable
Proxy' field.
When port number is specified, DNS NAPTR/SRV queries aren't
performed, even if ProxyDNSQueryType is set to 1 or 2.
For the ini file, the IP address of the first redundant Proxy are defined by
the second repetition of the ini file parameter ProxyIP.
IP addresses of the second redundant Proxy you are using.
Enter the IP address as FQDN or in dotted decimal notation (e.g.,
192.10.1.255). You can also specify the selected port in the format <IP
Address>:<port>.
Notes:
This parameter is available only if you select 'Use Proxy' in the 'Enable
Proxy' field.
When port number is specified, DNS NAPTR/SRV queries aren't
performed, even if ProxyDNSQueryType is set to 1 or 2.
For the ini file, the IP address of the second redundant Proxy is defined
by the third repetition of the ini file parameter ProxyIP.
IP addresses of the third redundant Proxy you are using.
Enter the IP address as FQDN or in dotted decimal notation (e.g.,
192.10.1.255). You can also specify the selected port in the format <IP
Address>:<port>.
Notes:
This parameter is available only if you select 'Use Proxy' in the 'Enable
Proxy' field.
When port number is specified, DNS NAPTR/SRV queries aren't
performed, even if ProxyDNSQueryType is set to 1 or 2.
For the ini file, the IP addresses of the third redundant Proxy is defined
by the fourth repetition of the ini file parameter ProxyIP.
[0] Parking = gateway continues working with the last active Proxy until
the next failure (default).
[1] Homing = gateway always tries to work with the primary Proxy server
(switches back to the main Proxy whenever it's available).
Note: To use ProxyRedundancyMode, enable Keep-alive with Proxy option
(EnableProxyKeepAlive = 1 or 2).
Description
86
Mediant 1000
Document #: LTRT-83302