Configuring The Ike Table - AudioCodes Mediant 1000 User Manual

5.9.7

Configuring the IKE Table

The 'IKE Table' screen is used to configure the IKE parameters.
To configure the IKE table using the Embedded Web Server, take
these 6 steps:
1. Access the Embedded Web Server (refer to 'Accessing the Embedded Web Server'
on page 60).
2. Open the 'IKE Table' screen (Advanced Configuration menu > Security Settings >
IKE Table option).
3. From the 'Policy Index' drop-down list, select the peer you want to edit (up to 20 peers
can be configured).
4. Configure the IKE parameters according to the parameters described in the table
below. Up to two IKE main mode proposals (Encryption / Authentication / DH group
combinations) can be defined. The same proposals must be configured for all peers.
5. Click Create; a row is create in the IKE table
6. To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
SIP User's Manual
Figure 5-55: IKE Table Screen
240
Mediant 1000
Document #: LTRT-83302