AudioCodes Mediant 1000 User Manual page 312

ini File Field Name
Web Parameter Name
FXSCoeffFileURL
FXOCoeffFileURL
CasFileURL
TLSRootFileUrl
TLSCertFileUrl
UserInfoFileURL
AutoUpdateCmpFile
AutoUpdateFrequency
AutoUpdatePredefinedTi
me
ResetNow
BootP and TFTP Parameters
The BootP parameters are special 'Hidden' parameters. Once defined and saved in the flash
memory, they are used even if they don't appear in the ini file.
BootPRetries
SIP User's Manual
Table 6-2: System Parameters
Valid Range and Description
Specifies the name of the FXS coefficients file and the location of the
server (IP address or FQDN) from where it is loaded.
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Specifies the name of the FXO coefficients file and the location of the
server (IP address or FQDN) from which it is loaded.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Specifies the name of the CAS file and the location of the server (IP
address or FQDN) from which it is loaded.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Specifies the name of the TLS trusted root certificate file and the location
URL from where it's downloaded.
Specifies the name of the TLS certificate file and the location URL from
where it's downloaded.
Specifies the name of the User Information file and the location of the
server (IP address or FQDN) from which it is loaded.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Enables / disables the Automatic Update mechanism for the cmp file.
[0] = The Automatic Update mechanism doesn't apply to the cmp file
(default).
[1] = The Automatic Update mechanism includes the cmp file.
Determines the number of minutes the gateway waits between automatic
updates. The default value is 0 (the update at fixed intervals mechanism
is disabled).
Schedules an automatic update to a predefined time of the day.
The range is 'HH:MM' (24-hour format).
For example: 20:18
Note: The actual update time is randomized by five minutes to reduce
the load on the Web servers.
This parameter is now obsolete.
Note: This parameter only takes effect from the next reset of the
gateway.
This parameter is used to:
312
Mediant 1000
Document #: LTRT-83302