Optional Settings: User Options - h/p/cosmos 150/50 Operating And Service Manual

5.10 Optional settings: User Options

Optional settings serve for example as confirmation of error notes on the display, or for the standard setting of the
device: selection of RS232 interface protocol, etc. For optional settings on devices without UserTerminal, an external
UserTerminal or a connected PC with the software h/p/cosmos para control
Select user options
Initiation: Running belt is not moving. One of the modes LED  is flashing: (manual, profile, cardio, test)
Step no. Activity
[01]
Select option mode (OPxx)
for users
Note: The option mode for
administrators is only
accessible for authorised
service technicians, not for
users
[02]
Select option no. 01 ... 53
[03]
Confirm option no.
[04] Example: OP 01 (OIL &
other error codes):
Confirmation & deleting by
pressing:
[05] Example: OP 02 (Distance /
km): Confirmation by
pressing
[06]
Example: OP 08
(STOP-time / "slow-down-
time"):
a) change value by pressing
confirm value by pressing
b)
© 2013 h/p/cosmos sports & medical gmbh
Keys Response / Display
a =
!
and simultaneously
d
and simultaneously
b
for at least 3
seconds.
a d =
or
!
option, e.g.: E.rE SEt (for Error reset)
Read, confirm and set options according to the following
c
option list. All adjustable values are going to be shown
flashing. All non-adjustable values are not going to be
shown flashing.
Display indicates: donE (confirmation)
c
c
a d
a) or
c
b)
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
is required.
®
indicates: OP 01 flashing (for option no. 01)
"
indicating: E.rE SEt (for error reset
and
indicates: OP 01 ... OP 53 flashing
"
indicate: a short explanation of the
and
created 07.02.2013 printed 04.03.2013 page: 71 of 197
operation
)