[6.A2] List Of User Options / Optional Functions - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

List of user options / optional functions
[6.A2]
For devices without UserTerminal: An external UserTerminal or PC software h/p/cosmos para control
to control the running machine via RS232 interface.
Option Description
[6.A2]
OP01 Setting back (deleting) of error
messages
OP02 Total distance covered (km)
OP03 Indication of total hours of operation (h)
= stand-by-time including runtime of
motor/ running belt
OP04 Indication of total hours of operation (h)
= runtime of motor/running belt
OP05 Indication of Firmware-Version and date
OP06 Adjustment of actual date and the real
time clock
© 2008 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Comment / Display
The required maintenance work has to be performed before deleting
error messages. The h/p/cosmos service department has to be
contacted before one of the service displays or error codes will be
deleted!
§
Confirmation in display
Info: This option only sets back the error message! If the error still
exists, you are not able to set back the error message. In this case
consult an authorised service engineer
The following intervals are set back by this operation:
E.01: Oil-interval A-OP 35
E.02: Service-time-interval A-OP 37
E.02: Service-distance-intervall A-OP 38
Note: This option resets exclusively the causing variable. If for
example the E.02 service-time-interval is being set back with this
operation, the distance-interval is not set back and vice versa! Only
Administrator-option OP 47 resets all three values implicitly!
§ $
and indicates: total distance covered in km
%
indicates km
§ $
and show: operation hours
%
reports: h
§ $
and report: operation hours
%
shows: h
= !
reports "OP05"
"
indicates device type, e.g. "1.4"
§ $
indicates: „MCU 5"
%
reports default type, e.g. 1.3
!
shows: rtc for Real Time Clock
$
reports flashing: date / time, year, month, date, hours, minutes,
seconds
created 01.09.2008 printed 08.10.2008
optional settings
® is required
indicating "donE"
reports "typE"
reports version, e.g. "1.01.1"
page: 76 of 176