[4.D] Starting The Running Machines; [4.D1] Unlocking Of The Emergency-Stop Switch; [4.D2] Switching The Device On - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Starting the running machines
[4.D]
Unlocking of the emergency-stop switch
[4.D1]
In order to be able to switch on the device, you may have to unlock the Emergency-stop switch first by pulling it
(depending on the type) or turning it around (to the left hand side, see symbol).
Switching the device on
[4.D2]
If the running machine is at an angle of elevation > 0 when switching it on, it will
automatically drive into the position zero (display: ELEVATION „INIT"). So please take care
before switching on, that while driving down the elevation no harm can be done to persons
and there are no objects under the running machine.
No. Illustration
[01]
[02]
[03]
© 2008 h/p/cosmos sports & medical gmbh
Description
Release all emergency stop buttons of the treadmill-ergometer.
picture left unlatching by turning
picture below unlatching by pulling
The expulsion fuse at the front of the device (front terminal below
the hood) has to be switched on.
Switch on the running machine by using the white key (until 2003
green "ON" or "I" key). at the FrontTerminal. At some models built
before the year 12/2007 the location of the ON-/OFF-key could
also be the UserTerminal.
The indicator light within the key is glowing (if the indicator does
not flash up, please check the power supply, the expulsion fuse
and the Emergency-stop).
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
installation & commissioning
created 01.09.2008 printed 08.10.2008 page: 33 of 176