Switch On Procedure; Switch On Procedure Model Range 150/50 Up To 190/65 - h/p/cosmos 150/50 Operating And Service Manual

5.2 Switch on procedure

5.2.1

Switch on procedure model range 150/50 up to 190/65

If the running machine is at an angle of elevation > 0 when switched on, it will automatically
N
move to the position zero (display elevation „INIT"). Please ensure that while lowering the
elevation no harm is done to persons or objects under the running machine.
Plug the running machines directly into the wall socket. Each running machine should be
N
connected to a separate circuit. Mark the socket with the name and serial number of the running
machine.
The use of extension cables or multiple plug sockets is not allowed.
N
Electrical devices with mains connections must neither be used in wet and humid areas
N
(e.g. swimming pools, saunas, etc.) nor in environmental chambers.
no. Illustration
[01]
[02]
[03]
© 2013 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh email@h-p-cosmos.com
Description
Plug the power cord of the running machine directly
into the wall socket.
The use of extension cables or multiple plug sockets
is not allowed.
Release all emergency stop buttons of the running
machine.
Make sure that the expulsion fuse at the front of the
device (front terminal below the hood) is switched on.
created 07.02.2013 printed 04.03.2013
operation
page: 26 of 197