14. Mechanical adjustment
[2]
[3]
30 mm
14.3 Mechanical adjustment of the bypass tray section
14.3.1
Adjustment of the Bypass Paper Size Unit
This adjustment must be made in the following case:
• The Bypass Paper Size Unit has been removed.
[1]
[2]
[2]
302
[3]
4036fs3040c0
[3]
[3]
4036fs3050c0
Field Service Ver. 1.0 Mar. 2005
2. Secure the Scanner [2] in the posi-
tion shown on the left using the two
Scanner positioning screws [3].
3. Make the Feed Direction Adjustment.
☞ 233
1. Install the gear so that the protrusion
of the gear [1] and the mark [3] on
the Bypass Guide Rack Gear [2] are
aligned in a straight line.