1St Image Transfer Pressure Retraction Motor (M21); Toner Cartridge Motor C/K (M14) - Konica Minolta bizhub C650 Service Manual

6. Other
6.3.91

1st image transfer pressure retraction motor (M21)

1. Remove the high voltage unit/2 assy.
See the steps 1 to 17 of cleaner motor removing procedure.
See P.225
[2]
[1]
6.3.92

Toner cartridge motor C/K (M14).

1. Remove the high voltage unit/2 assy.
See the steps 1to 17 of cleaner motor removing procedure.
See P.225
[3]
[2] [1]
230
[3]
A00JF2C344DA
[4]
A00JF2C345DA
[1]
[2]
A00JF2C346DA
Field Service Ver. 8.0 Jun. 2008
2. Remove two screws [1] and the con-
nector [2], and take out the 1st image
transfer pressure retraction motor
[3].
2. Clear the harness.
3. Disconnect the connector [2], and
remove the harness from the wire
saddle [1].
4. Remove three screws [3], and
remove the toner cartridge motor C/
K Assy [4].
5. Remove two screws [1], and remove
the toner cartridge motor C/K [2].