Multiple Bypass Mechanical Clutch Adjustment - Konica Minolta Bizhub 162 Service Manual

Field Service Ver. 1.0 Apr. 2005
6.2

Multiple Bypass Mechanical Clutch Adjustment

• The assembled position of the collar/coupling on the torque limiter of the Paper Take-up
Mechanical Clutch is varied so that the clutch operates properly.
NOTE
• This adjustment is to be made when a paper take-up failure occurs in the Multiple
Bypass.
1. Remove the Paper Take-up Mechanical Clutch.
☞ 10
2. Aligning protrusion A of the torque limiter with any one of the three slits in the coupling,
fit the coupling over the torque limiter.
3. Aligning protrusion B of the torque limiter with any one of the three slits in the collar, fit
the collar to the torque limiter.
Protrusion B
4. Reinstall the Paper Take-up Mechanical Clutch and make copies using the Multiple
Bypass. If a paper take-up failure occurs again, repeat steps 1 through 3.
Protrusion A
Torque Limiter
Slits
Protrusion B
6. Mechanical adjustment
Coupling
Protrusion A
Slits
Collar
4687D021AB
19