6. Other
6.3.94
Toner supply motor/Y (M9), toner supply motor/M (M10),
toner supply motor/C (M11), toner supply motor/K (M12)
1. Remove the upper front door.
See P.105
2. Remove the upper left cover.
See P.111
3. Remove the toner cartridges (C,M,Y,K).
See P.53
4. Open the lower front door and take out the all imaging units.
See P.49
NOTE
• After the imaging unit has been removed from the main body wrap it in the light
shielding cloth and store it in a dark place. DO NOT leave the imaging unit
exposed to light for a extended of time as it will become damaged.
5. Remove the front right cover.
See P.117
[1]
[1]
232
[2]
A00JF2C224DA
[2]
A00JF2C349DA
Field Service Ver. 8.0 Jun. 2008
6. Remove three screws [1], and
remove the exit tray front cover [2].
7. Remove two screws [1], and remove
the connector cover [2].