Konica Minolta bizhub C650 Service Manual page 354

Field Service Ver. 8.0 Jun. 2008
• When the optional finisher FS-519 is mounted.
3
Functions • To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
Use • To change the output tray according to the application.
Setting/ • The default settings are as follows.
Procedure Copy
Print
Report Output
Fax
• When the JS-504 is mounted.
3
Functions • To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
Use • To change the prior output tray according to the application.
Setting/ • The default settings are as follows.
Procedure Copy
Print
Report Output
Fax
(3) Bin Setting (bizhub C451 only)
• It will be displayed only when the optional mailbin kit MT-502 is mounted.
Functions • Assign the tray 1 of the finisher to the mailbin 5, and the tray 2 to the mailbin 6.
• The tray 2 can be assigned when the optional exit tray OT-602 is mounted.
Use • Use when assigning the tray 1 and the tray 2 of the finisher to the mailbins.
Setting/ • The default setting is Disable.
Procedure
G. AE Level Adjustment
• It will be displayed only when the following setting is set to "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
• It will not be displayed when the following setting shows that authentication device or the
vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
Functions • To set the default setting for AE (Auto Exposure) The larger the value becomes the
more emphasized the background will be.
Use To make the background level foggier: Increase the setting value
To make the background level less foggy: Decrease the setting value
Setting/ • The default setting is 2.
Procedure
: Tray 1 (Tray 3: When [Bin Setting] is enabled.)
: Tray 1
: Tray 2 (Tray 3: When the optional OT-602 is mounted./When
[Bin Setting] is enabled.)
: Tray 2 (Tray 3: When the optional OT-602 is mounted./When
[Bin Setting] is enabled.)
: Tray 1
: Tray 2
: Tray 1
: Tray 2
Enable
"2" (0 to 4)
8. Utility Mode
"Disable"
301
3