Field Service Ver. 8.0 Jun. 2008
6.3.66
Scanner motor (M201)
A. Removal procedure
1. Remove the IR rear cover.
See P.113
2. Remove the IR upper rear cover /1.
See P.113
[1]
[2]
[1]
[4]
[3]
A00JF2C264DA
[1]
A00JF2C265DA
3. Remove the connector [1] and take
out the harnesses from two wire sad-
dles [2].
4. Then remove the screw [3] to take
out the 20 degree sensor assy [4].
5. Remove the harness from two edge
covers [1].
6. Other
199